Ricoh Aficio Copy Machine 180 User Manual
Page 525
Facsimile User Tools
140
7
To change an existing Irregular Scan
size, just use the following procedure
to overwrite it.
Important
❒ When registering or changing an
original size, we recommend that
you make a memo of the new size.
Limitation
❒ For the vertical length (width), se-
lect “Auto,” “A4 (210 mm),” “B4
(257 mm),” “A3 (297 mm),” “8
1
/
2
inch,” or “11 inch.”
❒ For the horizontal length, specify
from 128 to 1200 mm or from 5.5 to
47 inches. You cannot set a length
less than 128 mm or longer than
1200 mm.
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
❒ If the standby display is not
shown, press the
{
Fax
} key.
B
Press the
{{{{
User Tools/Counter
}}}} key.
C
Enter the number of the “Fax”.
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, refer to the System Set-
tings manual.
D
Enter the function number for
“Register/Delete” using the num-
ber keys.
E
Enter the function for “Reg. Irreg.
Area” using the number keys.
Note
❒ If the appropriate display is not
shown, press
[
↑↑↑↑
Prev.]
or
[
↓↓↓↓
Next]
.
F
Press
[Area 1]
or
[Area 2]
.
Note
❒ If a size is already registered, it
is shown on the display.
G
Press
[Vert.]
.