NEC Server 140Rc-4 - Manual (Page 97)

Setting Up Your Server 3-25
1
2
A
B
Device with the serial
interface
(e.g., Management PC)
Device with the USB Interface
(e.g., keyboard)
Keyboard
Mouse
Display unit
Hub
(multiport repeater)
*1 To connect the external SCSI devices, change the baseboard cable connection.
*2 A leased line cannot be connected directly to this connector. The console of a management PC can be connected to
only serial port B. (BIOS setting required) Connect the console to only serial port B on either the front or rear panel.
To connect the rear side serial port B, change the baseboard cable connection with rear side serial cable that comes
with the server.
Device with USB interface
(e.g., terminal adapter)
FRONT
REAR
Device with the
serial interface
*2
Printer with the
parallel interface
Device with the ICMB interface
Finally connect the provided
power cord to the receptacle.
If connecting the server to UPS,
see the explanation below.
When an optional power
supply unit is additionally
installed
SCSI device *1
Network system
on LAN
(connected
via a hub)
Device with the serial interface
(e.g., modem)
Direct connection to the private
telephone line is prohibited.
100BASE TX/
10BASE-T
1000BASE-T
100BASE TX/
10BASE-T