NEC Server 140Rc-4 User Manual

Page 218

6-22 Installing and Using Utilities

Select the [Properties] command from the popup menu displayed by clicking the right
mouse button on the server name to display the [Properties] dialog box.

If the [Properties] dialog box appears, provide the following setting:

<[ID] page>

Connection Type: LAN

<[Alert Notifications] page>

Remove the check of [Use Default Settings] and check the [RESET] of [Activate].

Select the [Open Remote Console] command from the popup menu displayed by clicking
the right mouse button on the server name to start the [MWA Remote Console].

10.

Select the [Action at Remote Console Connect] command from the popup menu displayed
by clicking the right mouse button on the server window to display the [Action at
RomPilot Connect] dialog box. Then select [Go MWA mode].

11.

Insert the NEC EXPRESSBUILDER CD-ROM into the CD-ROM drive of the server.

Insert the floppy disk storing the configuration information file into the floppy disk drive.

This manual is related to the following products:

Server Express5800