List of optional devices and their available slots, Onboard lan controller considerations – NEC Server 140Rc-4 User Manual
Page 312
9-26 Upgrading Your Server
List of Optional Devices and their Available Slots
The following table shows the cards supported by this server and the available slots:
PCI
PCI-X
#1
#2
#3
#4
#5
#6
#7
#8
32-bit/33 MHz
64-bit/100 MHz
Profile
Full-height
Voltage
5 V
3.3 V
Board size
Long/Short
N Code
Product
name
Hot-plug
Non-hot-plug
Hot-plug
N8103-65F
SCSI controller
√
√
√
√
√
√
√
√
N8503-56F
SCSI controller
√
√
√
√
√
√
√
√
N8103-81F
Disk array controller*
1
–
–
√
√
√
√
√
√
N8104-103
1000BASE-T adapter*
2
–
–
√
√
√
√
√
√
N8104-111
100BASE-TX adapter*
3
√
√
√
√
√
√
√
√
N8104-86
100BASE-TX adapter*
4
√
√
√
√
√
√
√
√
√: Can be installed. –: Cannot be installed.
*1
Up to 4 cards can be installed.
*2
Up to 2 cards (up to 4 cards for AFT/ALB) can be installed.
Supports hot-plug feature.
*3
Supports hot-plug feature. Up to 5 cards can be installed.
*4
Up to 2 cards can be installed.
Onboard LAN Controller Considerations
It is impossible to configure the Teaming function of AFT(Adapter Fault Tolerance)/ALB (Adaptive
Load Balancing) in a standard network controller (on board LAN controller).
And it is also impossible to configure the Teaming function of the same AFT/ALB on a standard
network controller and an optional LAN board.