NEC Server 140Rc-4 - Manual (Page 383)

Installing Windows Server 2003 D-11
NOTE: We recommend you to add "Network Monitor" at "Adding
Services".
"Network Monitor" can monitor frames (or packets) sent or received by
a computer on which "Network Monitor" is installed. This is an
effective tool for analyzing network faults.
For information about the installation procedure, see Chapter 6.
Re-install the Network Driver
The network driver will be installed automatically.
Installing SCSI Controller Driver
If you utilize SCSI controller driver (N8103-65F/75), install it according to the following procedure:
1. Start [Device Manager] from [Start] menu → [Control Panel]→ [Administrative Tools] →
[Computer Management].
2. Double click the SCSI Controller driver which Device Manager lists as unknown device.
3. Click [Update Driver].
4. When the "Update Device Driver Wizard" appears, select "Install from a list or specific
location [Advanced]" and click [Next].
5. Select "Don't search. I will choose the driver to install" and click [Next].
6. Click [Have Disk..].
7. Insert "Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER" into the floppy
disk drive, enter "a:\" into "copy manufacturer's file from:" and click [OK].
8. Specify the following driver and click [Next].
– [INITIO INI-A10XU2W PCI SCSI Controller](When N8103-65F board is installed.)
– [Adaptec SCSI Card 29320ALP - Ultra320 SCSI](When N8103-75 board is installed.)
The installation of the driver is completed.
Restart the system according to the message appeared on the screen.