NEC Server 140Rc-4 - Manual (Page 141)

Configuring Your Server 4-31
Console Redirection
Selecting "Console Redirection" on the Server menu shows the following screen.
See the table below for the items.
Option Parameter Description Your Setting
Serial Port
Address [Disabled]
On-Board Com A
On-Board Com B Selects the port to be used as the
redirection port. The parameters
specified in I/O device configuration
submenu is used as address and
interrupt.
ACPI Redirection
Port [Disabled]
On-Board Com A
On-Board Com B Specify the I/O port address or
interrupt level used in ACPI headless
console redirection.
If [Disabled] is selected, console
redirection feature is disabled.
Baud Rate [9600]
19.2k
38.4k
57.6k
115.2k Specify the baud rate used for the
interface with successive hardware
consoles.
Flow Control None
XON/XOFF
CTS/RTS
[CTS/RTS+CD] Specify the flow control method.
Console Type PC ANSI
[VT100+]
VT-UTF8 Specify the console type.
Remote Console
Reset [Disabled]
Enabled Specify whether the reset from remote
console is enabled or disabled.
[ ]: Factory-set