NEC Server 140Rc-4 - Manual (Page 145)

Configuring Your Server 4-35
SCSI BIOS ~ SCSISelect ~
The SCSISelect utility is provided to configure the SCSI controller on the baseboard (or the SCSI
controller on an optional board). This utility may be started with a simple key operation while
POST is in progress and requires no specific start-up disk.
Using SCSISelect Utility
Use the SCSISelect utility mainly to set the transfer speed of connected SCSI devices. The SCSI
devices include those installed in the 5.25-inch device bays and backup devices, such as an external
DAT and MO, but not hard disks.
IMPORTANT: SCSI configuration must be made on a per-SCSI
controller basis with a utility. The server contains one SCSI controller.
When you added optional SCSI controllers, you need to make
configuration for each SCSI controller in addition to the standard
internal SCSI controller. Some additional SCSI controllers may
require a different utility to make changes to the configuration.