NEC Server 140Rc-4 - Manual (Page 363)

Appendix B
Other Precautions
Transfer Rate of the On-board LAN Controller
The baseboard includes the two network interface controllers.
„ LAN 1 supports 10Base-T and 100Base-TX networks and a capable of full or half duplex.
„ LAN 2 supports 10Base-T, 100Base-TX, and 1000Base-T networks and a capable of full
or half duplex.
The both controllers can automatically detect and switch for network speed and transfer mode
connected to the HUB. However, for proper network operation, specify the "Link Speed & Duplex"
value the same as the value specified for HUB.
Server Management Software
The NEC EXPRESSBUILDER CD-ROM that comes with the server contains the NEC ESMPRO
utility.
NEC recommends that you should install the NEC ESMPRO for effective use of the reliability
enhancement features of the server.
Floppy Disk
The following describes use of the floppy disk.
Floppy disk type
The server uses 3.5-inch floppy disks. You can use the following two types of 3.5-inch floppy
disks:
„ 2HD floppy disk (double-sided high-density track type)
Stores data of 1.44MB.
„ 2DD floppy disk (double-sided double-density track type)
Stores data of 720KB.
Shutter
Insertion direction
indicator
Centering hub
Catching hole
Head window
Centering hole Label
Rear Front
High-density media hole
(2HD only) Write protection switch
Write protection
hole