NEC Server 140Rc-4 - Manual (Page 125)

Configuring Your Server 4-15
Memory Configuration
Selecting "Memory Configuration" on the Advanced menu shows the following screen.
See the table below for the items.
Option Parameter Description Your Setting
DIMM Group #1 -
#3 Status Normal
Not installed
Disabled Indicates the current memory status.
"Normal" indicates that the memory
devices operate normally.
"Disabled" indicates that one or more
memory devices are defected.
"Not Installed" indicates that no
memory devices are installed.
(Display only)
Memory Retest [No]
Yes Clears the DIMM group error status
information.
Extended RAM
Step 1MB
1KB
Every-Location
[Disabled] "1MB" indicates that the memory test
is done in the unit of 1MB. "1KB"
indicates that the memory test is done
in the unit of 1KB. "Every-Location"
indicates that every memory device is
tested. "Disabled" indicates that only
memory initialization is done.
Online
Sparing/Mirroring
Memory [Disabled]
Sparing
Mirroring Specify whether the Memory Mirroring
/ Online Spare Memory feature is
enabled or disabled.
See Chapter 9 for details.
[ ]: Factory-set
NOTES:
„ To enable memory mirroring /online spare memory feature, memory
boards in DIMM group #1 and #3 must be the same capacities and
type.
„ Contact your service representative if you need to use these features.