NEC Server 140Rc-4 User Manual
Page 132
4-22 Configuring Your Server
Option
Parameter
Description
Your Setting
Serial Port A
Disabled
[Enabled]
Auto
Specify whether serial port A is
enabled or disabled.
Base I/O Address
[3F8]
2F8
3E8
2E8
Interrupt
IRQ 3
[IRQ 4]
Selects the base address and interrupt
(IRQ) for serial port A. These menus
are displayed if the Serial port A is
enabled.
Serial Port B
Disabled
[Enabled]
Auto
Specify whether serial port B is
enabled or disabled.
Base I/O Address
3F8
[2F8]
3E8
2E8
Interrupt
[IRQ 3]
IRQ 4
Selects the base address and interrupt
(IRQ) for serial port B. These menus
are displayed if the Serial port B is
enabled.
Parallel Port
Disabled
[Enabled]
Auto
Specify whether the parallel port is
enabled or disabled.
Mode
Output Only
Bi-directional
EPP
[ECC]
Base I/O Address
[378]
278
Interrupt
IRQ 5
[IRQ 7]
DMA channel
[DMA 1]
DMA 3
Selects the parallel port operation
mode, base address, interrupt (IRQ),
and DMA channel for the parallel port.
These menus are displayed if the
Parallel Port is enabled.
Legacy USB
Support
[Disabled]
Enabled
Specify whether the USB keyboard is
made available in OS which does not
support USB formally.
PS/2 Mouse
Disabled
[Enabled]
Specify whether the mouse is enabled
or disabled.
[ ]: Factory-set