NEC Server 140Rc-4 User Manual
Page 120
4-10 Configuring Your Server
Option
Parameter
Description
Your Setting
System Time
HH:MM:SS
Set the time.
System Date
MM/DD/YYYY
Set the date.
Legacy Floppy A
Disabled
1.2MB
5.25"
720Kb
3.5"
[1.44/1.25MB 3.5"]
2.88MB
3.5"
Set the settings of floppy disk
drive A (standard configuration).
Normally set to "1.44/1.25MB
3.5".
Legacy Floppy B
[Disabled]
1.2MB
5.25"
720Kb
3.5"
1.44/1.25MB 3.5"
2.88MB
3.5"
Set the settings of floppy disk
drive B.
Set to "Disabled" since the
server does not support drive B.
Hard Disk Pre-Delay
[Disabled]
3 seconds
6 seconds
9 seconds
12 seconds
15 seconds
21 seconds
30 seconds
Set the waiting time in first
accessing to the IDE device
during POST.
Primary IDE
Master/Primary IDE
Slave
–
Set the information on the device
connected to each channel on
the submenu. The settings of
some items may be changed.
However, leave the items as they
are at the shipment.
Language
English (US)
French
German
Spanish
Italian
Select the language used for
SETUP.
[ ]: Factory-set