NEC Server 140Rc-4 - Manual (Page 116)

4-6 Configuring Your Server
CPU
To enable the CPU degradation feature
Select [Advanced] - [Memory/Processor Error] - [Halt].
To check the installed CPU status
Select [Main] - [Processor Settings] and check the status indications.
The on-screen CPU numbers and socket locations on the baseboard are associated as
shown in the following figure.
To clear the CPU error information
Select [Main] - [Processor Settings] - [Processor Retest] - [Yes] and reboot.
Processor (CPU) #3
Processor (CPU) #2
Processor (CPU) #1
Processor (CPU) #4