NEC Server 140Rc-4 - Manual (Page 63)

General Description 2-29
3. Displays the SCSI ID numbers used by the connected SCSI devices on the screen.
4. If one or more disk array controllers are installed, displays the message prompting you to
start the Disk Array BIOS setup utility.
Start the utility according to the message if you need to change the settings. Refer to the
manuals of the disk array controllers for details.
Without any entry, any of the following messages appears.
5. Displays the message notifying you of the detection of the CPU and the connected
keyboard and mouse.
6. Displays any of the following messages.
Pattern 1:
Press to enter boot selection menu
Press to enter SETUP or to Network
Pattern 2:
Press to enter boot selection menu
Press to enter SETUP, Service Partition, to Network
Or
Pattern 3:
Press to enter boot selection menu
Press to resume, to enter Setup, to Network
Pattern 4:
Press to enter boot selection menu
Press to resume, to enter Setup, Service Partition, Network
* The displayed message may vary depending on the device status.