NEC Server 140Rc-4 - Manual (Page 122)

4-12 Configuring Your Server
Primary IDE Master/Primary IDE Slave
Selecting "Primary IDE Master" or "Primary IDE Slave" on the Main menu shows the following
submenu.
See the following table for the items.
Option Parameter Description Your Setting
Type [Auto]
None
CD-ROM
IDE Removable
ATAPI Removable
Other ATAPI User Set the IDE device to be the master.
The selection of "Auto" causes the
device to be detected automatically
during execution of POST.
"None" disables the connected device.
Cylinders 1-2048 Indicates the number of cylinders
(display only).
*1, *2
Heads 1-16 Indicates the number of read/write
heads (display only).
*1, *2
Sectors 1-64 Indicates the number of sectors on
each track (display only).
*1, *2
Maximum
Capacity – Indicates the drive capacity (display
only).
*2
Multi-Sector
Transfers [Disabled]
2 Sectors
4 Sectors
8 Sectors
16 Sectors Indicates the status of multi-sector
transfer controlled by BIOS.
*3
LBA Mode Control [Disabled]
Enabled Indicates the status of the LBA
(Logical Block Access) controlled by
BIOS.
*3
32 Bit I/O [Disabled]
Enabled Specify whether the 32-bit IDE data
transfer is enabled or disabled.