Description of migration phases – Nortel Networks NN43001-121 User Manual
Page 88
88
Planning and engineering
Phase
Description
User experience
8. Continue migrating users.
Migrate remaining users.
Enable users for enhanced
presence. Roll out the OC 2007
client and the Live Meeting
2007 client to the users.
•
OC 2007 users can use the
full functionality of OC 2007
when communicating with
other OC 2007 users.
•
When OC 2007 client users
are communicating with OC
2005 users, they cannot
use the new features in OC
2007.
•
After Live Meeting 2007
is rolled out to your users,
they can participate in
on-premise conferences
internally and connect
to these conferences
remotely by using the Web
Conferencing Edge Server.
•
RCC is only available to
either OCS 2007 or LCS
2005 users when one
SIP CTI FE Signaling
Server is deployed.
For more information,
see
9. Decommission all Live
Communications 2005 servers
and MCM 2.0 after all users
have been migrated to OCS
2007
Remove Live Communications
Server 2005 and MCM 2.0 from
your environment.
All users are on OC 2007,
enabled for enhanced presence
and have full functionality of
OC 2007. If Live Meeting is
deployed, users can participate
in on-premise conferences
internally and connect to these
conferences remotely by using
the Web Conferencing Edge
Server.
10. Decommission the SIP CTI
FE for LCS (if installed)
Remove the SIP CTI FE for
LCS (if an additional Signaling
Server was deployed).
None.
Description of Migration Phases
To deploy OCS 2007 in an existing Live Communications Server 2005
topology, Nortel recommends the following phases:
Nortel Communication Server 1000
Nortel Converged Office Fundamentals — Microsoft Office Communications Server 2007
NN43001-121
01.03
Standard
Release 5.0
30 April 2008
Copyright © 2005–2008, Nortel Networks
.