Nortel Networks NN43001-121 - Manual (Page 148)

148 Configuration
Network dial plan section The following table describes the fields for
Dial plan and Access code.
Table 29
Network dial plan
Configuration field Description
Dial plan Use the dial plan to make calls between the CS 1000 and OCS (CDP or
UDP). If the Line URI is configured as UDP, the dial plan will also be UDP.
Access code Access code for the UDP plan. This code is added to the phone number
stored in the OC user’s Line URI.
Outgoing CLID Number Parameters section The following table
describes the fields for Prefix Delete and Prefix Insert.
Table 30
Outgoing CLID Number Parameters
Configuration
field Description
Prefix Delete Number of prefix digits to be deleted from the CLID number sent by MCM
to the CS 1000.
Prefix Insert Prefix digits to be inserted in the CLID number sent by MCM to the CS 1000.
Outgoing CLID Name Parameters section Outgoing CLID Name
Parameters manipulate the name string to display the name on a CS 1000
configured in the desired format. The name must be defined in the Active
Directory in the format Last, First [additional info].
Table 31
Outgoing CLID Name Parameters
Configuration field Description
FirstName LastName First name Last name—display name format.
LastName, FirstName Last name, First name—display name format.
LastName FirstName Last name First name—display name format.
AD Display Name Click the check box to use the Display Name value from
AD for the calling user name.
SIP CTI Authorization section Click the Enable RCC Authorization
check box to enable the authorization of SIP CTI INVITES from Office
Communicator (OC). Only the OC user’s phone that is configured in the
Active Directory is controlled.
Nortel Communication Server 1000
Nortel Converged Office Fundamentals — Microsoft Office Communications Server 2007
NN43001-121 01.03 Standard
Release 5.0 30 April 2008
Copyright © 2005–2008, Nortel Networks
.