Nortel Networks NN43001-121 - Manual (Page 210)

210 Maintenance
SIP tracing can be filtered by DN number. MCM SIP tracing is
implemented as part of the application logging functionality. Special
commands are not required. For more information on tracing, see
Capturing traces and logs
— You can remotely access the Office Communications Server
application using the Windows 2003 server remote access capability.
— Task Manager is supported in Windows 2003 Server for MCM.
Patches and upgrades
Patching is not supported in MCM 3.0 .. Fixes are provided in up-issues
and maintenance releases.
Software upgrades install the new application and use or upgrade the
existing configuration file. MCM 3.0 is delivered on a CD and available for
download from the Nortel Web site
www.nortel.com .
ATTENTION
All customer configured MCM application data is retained during an MCM
application upgrade.
Remote Call Control
Signaling Server OAM Level CLI Commands
The Signaling Server OAM Level CLI commands are used to query active
TR/87 sessions to turn on tracing at the SIP level. You can use these
commands to terminate either a session for a specific DN or to terminate all
TR/87 sessions that are currently active on the server.
Table 37
Signaling Server OAM Level CLI commands
Prompt Response Description
> SIPCTISessionShow Show the total number of TR87
SIP sessions.
> SIPCTITraceShow Display the trace settings for
SIP CTI application, including
the trace filter setting and output
setting.
> SIPCTIShow Show SIP CTI application status
and configuration.
> SIPCTIClientShow Show information about the all
the soft clients associated.
Nortel Communication Server 1000
Nortel Converged Office Fundamentals — Microsoft Office Communications Server 2007
NN43001-121 01.03 Standard
Release 5.0 30 April 2008
Copyright © 2005–2008, Nortel Networks
.