Nortel Networks NN43001-121 - Manual (Page 174)

174 Configuration
LD 17: Configure AML Link
Prompt Response Description
REQ CHG Change existing data.
TYPE ADAN
ADAN A new AML link; the link is an ELAN type. The link number
can be from 32 to 47 on a small system and from 32 and
127 on a large system. An AML link number within the
above range implies that the transport is over a TCP link.
CTYP ELAN Card Type: ELAN
To verify that the AML link is up and running, use the STAT ELAN command
from LD 48:
LD 48
STAT ELAN
ELAN #: 032 DES: CDLCS
APPL_IP_ID: 47 .164 .116 .43 : 0000F600 LYR7: ACTIVE EMPTY
APPL ACTIVE
For more information on the STAT ELAN command, see Software Input
Output Reference — Maintenance (NN43001-711).
ATTENTION
For redundancy, one AML link is required for each Front End within the node,
regardless of whether the Front End is a leader or a follower.
LD 17: Configure VAS (Value Added Server)
Prompt Response Description
REQ CHG Change existing data
TYPE VAS Value Added Server
VAS NEW
VSID VAS ID, ranges from 32 to 47 on a small system and from
32 to 127 on a large system
ELAN AML ELAN link number provisioned when the AML link
was created
SECU YES Security For Meridian Link Applications. Enable this for the
TR/87 FE application on the Signaling Server to acquire
DNs
Nortel Communication Server 1000
Nortel Converged Office Fundamentals — Microsoft Office Communications Server 2007
NN43001-121 01.03 Standard
Release 5.0 30 April 2008
Copyright © 2005–2008, Nortel Networks
.