Telephony gateway and services planning, Systems, platforms, and applications, Table 14 systems, platforms, and applications – Nortel Networks NN43001-121 User Manual

Page 66

Planning and engineering

If calls that enter the Call Server are international and outside of the
country of the caller, the translator must contain entries that recognize the
international numbers and route the call to the appropriate route list. These
entries are generally within the existing AC1/AC2 translator, as they are
used to route international calls that are dialed directly from telephones.

E.164 international format numbers for SIP Gateway and SIP CTI

For information about E.164 international format numbers for SIP Gateway
(Computer) calls, see

"E.164 International Format Numbers from Office

Communicator - Computer Calls (SIP Gateway)" (page 170)

For information about E.164 international format numbers for SIP CTI
(Phone) calls, see

"Dialing E.164 International Format Numbers from Office

Communicator - Phone Calls (SIP CTI)" (page 190)

Telephony Gateway and Services planning

This section describes the planning and engineering issues associated with
the Telephony Gateway and Services component.

Table 14 "Systems, platforms, and applications" (page 66)

identifies the

systems, platforms, and applications supported by the Telephony Gateway
and Services component.