Nortel Networks NN43001-121 - Manual (Page 105)

OCS 2007 component installation 105
CS 1000 and Signaling Server installation
The first step in the installation and configuration process is to install the CS
1000 and Signaling Server.
Installing the CS 1000 system
To install and configure a CS 1000 system, see the following documents:
• Communication Server 1000M and Meridian 1 Small System Installation
and Commissioning (NN43011-310)
• Communication Server 1000M and Meridian 1 Large System Installation
and Commissioning (NN43021-310)
• Communication Server 1000E Installation and Commissioning
(NN43041-310)
ATTENTION
IMPORTANT!
Converged Office requires the Call Server and Signaling Server to have Release
5.0 software and with the Product Enhancement Packages (PEP) installed.
See the Nortel Converged Office Product Bulletin to ensure that you are using the
most current versions of the Call Server and Signaling Server PEPs.
Installing the Signaling Server
The Signaling Server must be installed. If it is not installed, see Signaling
Server Installation and Commissioning (NN43001-312).
For information about configuring the Signaling Server, see "Signaling
Server checklist" (page 262) .
OCS 2007 component installation
After all CS 1000 components are installed, go to the Microsoft Web site
www.microsoft.com for information about installing the OCS components,
beginning with the Active Directory.
Nortel Communication Server 1000
Nortel Converged Office Fundamentals — Microsoft Office Communications Server 2007
NN43001-121 01.03 Standard
Release 5.0 30 April 2008
Copyright © 2005–2008, Nortel Networks
.