beautypg.com

Table 26 network topology fields – Nortel Networks NN43001-121 User Manual

Page 141

background image

MCM 3.0 configuration

141

Network Topology section

The following is a description of some of

the configuration fields in the Network Topology section of the MCM
configuration window.

Table 26
Network topology fields

Configuration field

Description

Call Server

Type of call server CS 1000, CS 2000, CS 2100

SRS

Outgoing SIP messages from the MCM will use the SIP Redirect Server
for routing.

SPS

Outgoing SIP messages from the MCM will go through the SIP Proxy
Server.

Direct

Outgoing SIP messages from the MCM will terminate directory to a CS
1000 SIP GW.

Primary IP

IP address of primary SRS/SPS. Not used in the case of Direct SIP
Routing.

Secondary IP

IP address of secondary SRS/SPS. Not used in the case of Direct SIP
Routing.

Registration ID

MCM endpoint ID. This ID is in the format of host@domain. The host
must match the endpoint name as defined in the NRS/SPS for MCM.

Registration IP

Select the MCM proxy IP to register with the SRS/SPS.

Mode

Proxy mode for SPS. The SIP Proxy Server (SPS) acts as a redirect
server as well as a proxy server:

Proxy All—SPS will proxy/route all messages from the MCM.

Proxy SIP and Re-direct SIP-CTI—SPS will proxy/route SIP calls and
redirect SIP-CTI calls. In this mode, traffic going through the SPS is
reduced. This can also be useful for administration purposes.

Redirect All—SPS will redirect all messages. In this mode, SPS will
work in the same way as SRS

CS 1000 SIP GW IP

IP address of the CS 1000 Node. Used only for Direct SIP routing with
the CS 1000.

Transport

Only TCP is supported.

Port

SIP Port on SRS, SPS, and CS 1000. Default values are 5060 for TCP
and 5061 for TLS connections.

Mediation Server

Select the check box to use Mediation Server.

Routing table

Click the Routing Table button when using Mediation Server.

Mediation Server routing table

Several Call Servers from different

geographic locations may be connected to one MCM with one SIP Gateway.
For each geographic location, one or several Mediation Servers forming
Mediation Servers pool can be used. The sip-gw-id parameter is passed as

Nortel Communication Server 1000

Nortel Converged Office Fundamentals — Microsoft Office Communications Server 2007

NN43001-121

01.03

Standard

Release 5.0

30 April 2008

Copyright © 2005–2008, Nortel Networks

.