Nortel Networks NN43001-121 User Manual

Page 116

116

Configuration

For enabling Remote Call Control only, select Enable Remote Call
Control and configure the Server URI and Line URI. See

For enabling Enterprise Voice and PBX integration only (without
RCC), select Enable Enterprise Voice and the Enable PBX
integration check box. See

Figure 34 "Enable Enterprise Voice

and PBX integration" (page 118)

For enabling both Remote call control and Enterprise Voice,
you must select Enable Enterprise Voice and the Enable PBX
integration check box and specify the Server URI. See

Figure 35

"Enable both RCC and Enterprise Voice" (page 119)

Specify the MCM/App Proxy FQDN in the Server URI field. This
must be in the format of sip:CDP or UDP;phone-context=CDP
domain or UDP domain@MCM/APP Proxy FQDN. For example:

•

Sip:5001;[email protected]
tel.com – CDP format

•

Sip:3435001;[email protected]
tel.com – UDP format

Specify the URI of the user’s telephone in the Line URI field. The
Line URI must be in the format tel:E164;ext=CDP or UDP. For
example:

•

tel:+16139675000;ext=5001 – CDP format

•

tel:+16139675000;ext=3435001– UDP format.

ATTENTION

It is important to note that the chosen numbering plan must be applied to
the PCA and MCM configurations.

—End—

Nortel Communication Server 1000

Nortel Converged Office Fundamentals — Microsoft Office Communications Server 2007

NN43001-121

01.03

Standard

Release 5.0

30 April 2008