Nortel Networks NN43001-121 - Manual (Page 176)

176 Configuration
A new CLS (T87A) is introduced to allow a TN to support the SIP CTI
application.
The AST prompt is used to configure which DN key on the TN is controlled
or monitored by the SIP CTI application. A maximum of two keys per TN
can be configured as AST keys.
CLID information is sent, or suppressed, to Office Communicator based
on the CLS CNDA/CNDD consistent with the presentation of the CLID
information on the station display itself.
This affects whether CLID information (that can be available for calls that
do not map to Active Directory users) appears on the Office Communicator
call toast (for example, PSTN calls).
Considering MADN (Multiple Appearance DN)
When you configure a station, you must consider certain issues if Office
Communicator is used in a MADN environment:
• When multiple TNs exist in a MADN group, the T87A CLS and AST
configuration are configured only on the MARP TN
• When "twinning" a station with Office Communicator using a PCA , the
MARP TN within the MADN group must be on a station and not on the
PCA . For more information, see
Table 36 "LD 11–Twinning a station"
(page 176) .
Table 36
LD 11–Twinning a station
Prompt Response Description
REQ prt
TYPE dnb
CUST 0
dn 2070
Screen Output
DN 2070
CPND
XPLN 15
DISPLAY_FMT FIRST,LAST
TYPE SL1
TN 100 0 03 04 V KEY 00 MARP DES DLOCS2 3 DEC 2007 (2004P2)
TN 100 0 03 05 V KEY 00 DES PCA 16 APR 2008 (PCA)
NACT
Nortel Communication Server 1000
Nortel Converged Office Fundamentals — Microsoft Office Communications Server 2007
NN43001-121 01.03 Standard
Release 5.0 30 April 2008
Copyright © 2005–2008, Nortel Networks
.