Nortel Networks NN43001-121 User Manual
Page 211

Remote Call Control
211
Prompt
Response
Description
>
SIPCTITraceLevel
Configure the TR87 SIP message
Trace Level. The level can be
one of the following:
0 –TR87 SIP message body
(ECMA 323) only
1 – TR87 SIP message body
(ECMA 323) and message
headers
>
SIPCTITrace on
Turn on SIP CTI trace for all
soft clients in both incoming and
outgoing directions.
>
SIPCTITrace off
Turn off SIP CTI trace for all
soft clients in both incoming and
outgoing directions.
>
SIPCTITrace
Turn on SIP CTI trace for all
soft clients in incoming and/or
outgoing. The parameter is either
on or off.
>
SIPCTITrace sc
Turn on SIP CTI trace for a
specific soft client in incoming
and/or outgoing direction(s).
This may result in a number of
sessions as a single URI could be
used for multiple active sessions.
>
SIPCTIOutput
Redirecting the SIP CTI trace to
a specific output destination.
The destination can be one of the
following:
1.
TTY
2.
RPTLOG
3.
File
If File is selected as the output
destination, the filename must be
given.
Nortel Communication Server 1000
Nortel Converged Office Fundamentals — Microsoft Office Communications Server 2007
NN43001-121
01.03
Standard
Release 5.0
30 April 2008
Copyright © 2005–2008, Nortel Networks
.