Parker Products COMPAX-M /-S (L) - Manual (Page 182)

Accessories and options COMPAX-M / -S
182
The following are required:
♦ per COMPAX
• one encoder distributor .................................................................. EAM 4/01
• one cable for the COMPAX and encoder distributor connection ... SSK 4/..
• one bus cable for the connection between the encoder distributors... SSK7/..
♦ Encoder input module .................................................................... E4
♦ Bus terminator................................................................................ BUS 1/01
♦ For the encoder: encoder cable .................................................. GBK11/..
♦ For the SV drive: Cable: ................................................................ SSK7/..
cable
in
cable
out
cable
in
cable
out
cable
out
X13 X13 X13
No. 1 No. 2 No. 3
BUS1/01
Bus ter-
mination
IN OUT IN OUT
X1 X2 X3
Channel 1 Channel 2
X4
EAM4/01 X5
IN OUT IN OUT
X1 X2 X3 X4
EAM4/01 X5
IN OUT IN OUT
X1 X2 X3 X4
EAM4/01 X5
SSK4 SSK4 SSK4
Channel 1 Channel 2 Channel 1 Channel 2
BUS1/01
Bus ter-
mination
E3&
E4 E4 E4
♦ COMPAX 1 and COMPAX 2 receive the signals from one encoder.
♦ COMPAX 3 receives the actual COMPAX 1 value concerning its emulation.
The following are required:
♦ per COMPAX
• one encoder distributor................................................................ EAM 4/01
• one cable for the COMPAX and encoder distributor connection SSK 4/..
♦ 3 bus cables .................................................................................. SSK 7/..
♦ 2 bus terminators .......................................................................... BUS1/01
Encoder module:
♦ COMPAX 1 (not possible with COMPAX 1000SL as there is only 1 encoder channel present!) :
• Encoder input module.................................................................. E4
• Encoder emulation ...................................................................... E3
♦ COMPAX 2, 3:
• Encoder input module.................................................................. E4
• Encoder cable: ............................................................................ GBK11/..
Encoder bus
mixed
From encoder (GBK11) or SV drive encoder emulation (SSK7)
SSK7
COMPAX COMPAX COMPAX
SSK7
(configured in
COMPAX 1000SL)
(configured in
COMPAX 1000SL)