Parker Products COMPAX-M /-S (L) - Manual (Page 177)

HAUSER linear actuators
177
Unit
hardware
Connector
assignment / cable
Technical data
Configuration
Positioning and control functions
Optimization
functions
Interfaces
Accessories /
options
Status
Parameter
Error list
9.4 HAUSER linear actuators
The HAUSER "HLEc" linear unit is available with various cross sections:
♦ HLE80C cross section: 80 mm x 80 mm up to 6m long
♦ HLE100C cross-section: 100 mm x 100 mm up to 7m long
♦ HLE150C cross-section: 150 mm x 150 mm up to 10m long
Highly dynamic, modular linear axis "HPLA" with toothed belt drive or rack-
and-pinion drive:
♦ HPLA80: cross section: 80 mm x 80 mm
up to 50m for rack-and-pinion, up to 20m for toothed belt
♦ HPLA120: cross section: 120 mm x 120 mm
up to 50m for rack-and-pinion, up to 20m for toothed belt
♦ HPLA180: cross section: 180 mm x 180 mm
up to 50m for rack-and-pinion, up to 20m for toothed belt
Electric cylinder ET: with 50 - 1500 mm stroke. Tensile and shear forces up to
21000 N
Vertical actuators with toothed belt: up to 2500mm stroke; up to 100kg
payload
The attached transmissions are available with ratios of 3:1, 5:1, 7:1, 10:1 and 25:1.
Please contact us if you require more information.
If you are using, e.g. a rack-and-pinion drive, toothed belt drive or spindle drive,
you can obtain the necessary initiators and initiator connectors and cable from us.
We can also supply you with retaining material on request.
Initiator set