Replacing the battery – Palm 700P User Manual

Page 208

C O M M O N Q U E S T I O N S

202

5 If a language selection screen appears,

select the same language you selected
for your desktop software.

IMPORTANT

Always use the same

language for your Treo smartphone, your
operating system, and your desktop
software. Otherwise, you may lose
information or have difficulty with
synchronization. Support is not provided for
mismatched language setups.

6 Follow the onscreen instructions to

align the screen and set the date and
time.

Replacing the battery

Your Treo 700

smartphone comes with a

replaceable battery. Be sure to use a
replacement battery that is recommended
or sold by Palm and is compatible with the

Treo 700

smartphone. Failure to use the

proper battery may result in a risk of
personal injury or product damage, and it
voids your smartphone warranty.

1 Press Power/End

to turn off the

screen.

2 Press the battery door release, and

slide the battery door downward
to remove it from your smartphone.

3 Place a finger in the notch next to the

battery, and lift up the old battery at a
45-degree angle to remove it from the
compartment.

TIP

If you do not see the Erase all data?

message, the hard reset was not performed.
Retry these steps, making sure to hold
Power/End until the logo screen appears.

Battery door
release