Patton electronic 3120 - Manual (Page 86)

7 • Dial In Model 3120 RAS Administrators’ Reference Guide
86 Manage DNIS Window
• pap(3)—This setting assumes that all calls will be PPP users. No username or password prompt will be dis-
played. The system will go directly to PPP processing. The dial-up user must be configured for PAP authen-
tication.
Note If the user trying to connect to the access server is not configured for
PAP he will be disconnected.
• chap(4)—This setting assumes that all calls will be PPP users. No username or password prompt will be dis-
played. The system will go directly to PPP processing. The dial-up user must be configured on his computer
for CHAP authentication.
Note If the user trying to connect to the access server is not configured for
CHAP he will be disconnected.
• chapORpap(5)—This setting assumes that all calls will be PPP users. No username or password prompt
will be displayed. The system will go directly to PPP processing. The dial-up user must be configured for
PAP or CHAP authentication. The access server will always request CHAP authentication first. Therefore,
if a user can negotiate either CHAP or PAP, CHAP authentication will be performed.
• textORchapORpap(6)—This setting enables clear text logins or PPP calls using PAP or CHAP
authentication.
DOVBS (dnisProfileDOVBS)
With Data over Voice Bearer Service (DOVBS) the remote end initiates a voice call that is to be terminated digitally.
• disable(0) —DOVBS is not supported
• dovbs56(1)—The voice call will be terminated as a 56k digital call. This option allows an ISDN type call
over a robbed-bit T1.
• dovbs64(2)—The voice call will be terminated as a 64k digital call.
Service Port (dnisProfileServicePort)
The TCP port that the remote server is listening at for connections.
Service IP (dnisProfileServiceIP)
The host IP address that rlogin, telnet and tcpraw connections will be forwarded to.
Note If the login technique is set to a value other than none, the default
service must be configured via RADIUS or the static user database for
the user(s) to make use of this redirection feature.
Status (dnisIpProfileStatus)
Indicates if the DNIS Profile is used in any DNIS configuration.
• active(1)—This profile is used in one or more DNIS configurations
• notUsed(2)—This profile is not used in any configurations
• destroy(3)—deletes the DNIS profile