Enclosure system, Internal temperature (boxtemperature), Highest temperature (boxmaxtemperature) – Patton electronic 3120 User Manual
Page 244: Payable features, Enable payable features (boxfeatureenablekey), Installation, Country (installcountry), Other, Total dram detected (boxdetectedmemory), Systemid (sysobjectid)

20 • System
Model 3120 RAS Administrators’ Reference Guide
244
System main window
Enclosure System
This portion of the System main window contains information described in the following sections (see
figure 97 on page 243).
Internal Temperature (boxTemperature)
Displays the current temperature in celsius (centigrade).
Highest Temperature (boxMaxTemperature)
The highest temperature registered in celsius (centigrade) sinc the access server was last re-booted.
Payable features
This portion of the System main window contains information described in the following section (see
figure 97 on page 243).
Enable Payable Features (boxFeatureEnableKey)
This encoded string is used to enable payable features. This feature is not currently implemented.
Installation
This portion of the System main window contains information described in the following section (see
figure 97 on page 243).
Country (installCountry)
Specifies the country that the access server is installed in so it can be configured in accordance with local laws.
Other
This portion of the System main window contains information described in the following sections (see
figure 97 on page 243).
Total DRAM Detected (boxDetectedMemory)
The total number of bytes of DRAM detected by the CPU
SystemID (sysObjectID)
This SNMP variable represents the type of access server being managed as defined by specification RFC
1213.MIB.
Running Since Last Boot (sysUpTime)
This SNMP variable represents the time (in hundreds of seconds) since the network management portion of
the system was last re-initialized, as specified in RFC 1213.
System Manager (sysContact)
This SNMP variable represents the textual identification of the contact person for this managed node, together
with information on how to contact this person as defined by specification RFC 1213.
Box Name (sysName)
This is an administratively assigned name for this managed node. By convention, this is the node’s fully-quali-
fied domain name, as defined in RFC 1213.