Patton electronic 3120 - Manual (Page 84)

7 • Dial In Model 3120 RAS Administrators’ Reference Guide
84 Manage DNIS Window
• text(2)—A username prompt is displayed and a username must be entered. If the received username is a
static user with no password defined, then the connection completes and no password prompt is issued. If a
password is required then a password prompt is displayed and a password must be entered.
Note Text login with ISDN is not currently implemented.
• pap(3)—This setting assumes that all calls will be PPP users. No username or password prompt will be dis-
played. The system will go directly to PPP processing. The dial-up user must be configured for PAP authen-
tication.
Note If the user trying to connect to the DMA is not configured for PAP
he will be disconnected.
• chap(4)—This setting assumes that all calls will be PPP users. No username or password prompt will be dis-
played. The system will go directly to PPP processing. The dial-up user must be configured on his computer
for CHAP authentication.
Note If the user trying to connect to the DMA is not configured for CHAP
he will be disconnected.
• chapORpap(5)—This setting assumes that all calls will be PPP users. No username or password prompt
will be displayed. The system will go directly to PPP processing. The dial-up user must be configured for
PAP or CHAP authentication. The DMA will always request CHAP authentication first. Therefore, if a
user can negotiate either CHAP or PAP, CHAP authentication will be performed.
• textORchapORpap(6)—This setting enables clear text logins or PPP calls using PAP or CHAP
authentication.
DOVBS (dnisProfileDOVBS)
With Data over Voice Bearer Service (DOVBS) the remote end initiates a voice call that is to be terminated dig-
itally. A voice call carrying data is indicated by the presence of 3.1khz or speech in the bearer capability infor-
mation element of the SETUP message.
• disable(0) —DOVBS is not supported
• dovbs56(1)—The voice call will be terminated as a 56k digital call.
• dovbs64(2)—The voice call will be terminated as a 64k digital call.
Service Port (dnisProfileServicePort)
The TCP port on the remote machine listening for TCP raw or telnet connections
Service IP (dnisProfileServiceIP)
The IP address of the remote machine that the dial-in customer is to be redirected.
Status (dnisIpProfileStatus)
Indicates if the DNIS Profile is used in any DNIS configuration.
• active(1)—This profile is used in one or more DNIS configurations