Patton electronic CopperLink Ethernet Extenders 2168A User Manual

User manual

Text mode
Original mode

USER

MANUAL

CopperLink™ Ethernet

Extenders

Models 2168A and 2158A

SALES OFFICE
(301) 975-1000
TECHNICAL SUPPORT
(301) 975-1007

Part# 07M2168A-UM

Rev. C

Revised 4/20/10

An ISO-9001Certified

Company

This is a Class A device and is intended for use in a
light industrial environment. It is not intended nor
approved for use in an industrial or residential
environment.

This manual is related to the following products:

CopperLink Ethernet Extenders 2158A

Table of contents

Document Outline

1.0 Warranty Information
2.0 General Information
- 2.1 Features
- 2.2 Description
3.0 Installation
4.0 Configuration
- 4.1 Configuring the hardware DIP switches
- 4.2 Configuring DIP Switch SW
  - Switches SW-2 and SW-4: Data Rate
  - Switches SW-1 and SW-5 through SW-8: Reserved
5.0 Operation
- 5.1 Power Up
- 5.2 Front Panel LED Status Monitors
Appendix A Specifications
Appendix B Model 2168A and 2158A Series Factory Replacement Parts and Accessories
Appendix C CopperLink Series Interface Pin Assignment
- C.1 10/100Base-T Interface
  - RJ-45
- C.2 CopperLink Interface
  - RJ-45
  - Terminal Block
Appendix D Distance Chart, Based on 24 AWG (0.5 MM)