Patton electronic 3120 - Manual (Page 78)

7 • Dial In Model 3120 RAS Administrators’ Reference Guide
78 Dial In Modify Default window
V34(diModemV34Enable)
Enables or disables V34 modem modulation
V32(diModemV32Enable)
Allows V.32 and V.32bix modulations up to 14.4 kbps. The following options are available:
• disable(0)—neither option is enabled
• enable(1)—support V.32 and V.32bis modulations.
V23(diModemV23Enable)
Enables or disables V23 modem modulation
V22 (diModemV22Enable)
Allow V.22 or Bell 212 modulations. The following options are available:
• disable(0)—Neither option is enabled
• enableV22(1)—Enable V.22 modulation
• enableBell212(2)—Enable Bell 212 modulation
V21(diModemV21Enable)
Allow V.21 or Bell 103 modulations. The following options are available:
• disable(0)—Neither option is enabled
• enableV21(1)—Enable V.21 modulation
• enableBell103(2)—Enable Bell 103 modulation
Maximum V8 Failures (diModemMaxV8Failures)
Number of times the modem will attempt a V.8 connection before it is reinitialized. Upon reinitialization it
will automatically start making a V.8 connection.
Note This is for leased line operation only.
MaxSpeed (diModemMaxSpeed)—Not Currently Implemented
This variable assigns the fastest data rate that will be negotiated. The range is 300–64000.
MinSpeed (diModemMinSpeed)—Not Currently Implemented
This variable assigns the slowest data rate that will be negotiated. The range is 300–33600.
Note Increasing this number may prevent users with slower modems from
successfully connecting.
Guard Tone (diModemGuardTone)
Normally a guard tone is not required, but one can be inserted. This setting works for Phase Shift Key (PSK)
modulations only, not for V.32 or V.34.
• tone None(1)—Guard tone is not used