Patton electronic 3120 - Manual (Page 295)

WAN Circuit CONFIGURATION window 295
Access Server Administrators’ Reference Guide 23 • Sync PPP
LCP Authentication(pppStatLcpAuth)
Authentication type used. The following options are available:
• none(1)
• pap(2)
• chap(3)
• MSChap(4)—not currently implemented
• tacacs(5)—not currently implemented
• edp(6)
• ShivaPap(7)—not currently implemented
ACC Map (pppStatLocalToPeerACCMap)
The current value of the ACC Map used for sending packets from the local server to the remote unit. The local
unit sends this character map to the remote unit to ensure that the data being transferred is interpreted cor-
rectly. This setting becomes active when the link is in the up—able to pass packets—operational State.
Peer-Local ACC Map (pppStatPeerToLocalACCMap)
The current value of the ACC Map used by the remote unit when transmitting packets to the local unit. The
remote unit sends this character map to the local unit to ensure that the data being transferred is interpreted
correctly. The local unit combines its ACC Map with the map received from the remote unit. This setting
becomes active when the link is in the up—able to pass packets—operational state.
Local-Remote PPP Protocol Comprsn(pppStatLocalToRemoteProtComp)
Indicates whether the local PPP entity will use protocol compression when transmitting packets to the remote
PPP entity. This setting becomes active when the link is in the up—able to pass packets—operational state.
These are the available options:
• disabled(0)—PPP compression is disabled
• enabled(1)—PPP compression is enabled
Remote-Local PPP Protocol Comprsn (pppStatRemoteToLocalProtComp)
Indicates whether the remote PPP entity will use protocol compression when transmitting packets to the local
PPP entity. This setting becomes active when the link is in the up—able to pass packets—operational state.
These are the available options:
• disabled(0)—PPP compression is disabled
• enabled(1)—PPP compression is enabled
Local-Remote AC Comprsn(pppStatLocalToRemoteACComp)
Indicates whether the local PPP entity will use address and control compression (ACC) when transmitting
packets to the remote PPP entity. This setting becomes active when the link is in the up—able to pass packets
—operational state. These are the available options:
• disabled(0)—ACC is disabled