Patton electronic 3120 - Manual (Page 116)

8 • Dial Out Model 3120 RAS Administrators’ Reference Guide
116 Dial Out Modify window
Note V.59 generates an enormous amount of data. This can interfere with
your RADIUS server’s ability to perform authentication and account-
ing and fill up hard disk space on your server. It is recommended that
you only enable this feature when performing specific troubleshooting.
Modify Modem Configuration
This portion of the Dial Out Modify window (see figure 44 on page 114) describes modifying the outgoing
modem configuration.
ISDN (doModemISDNEnable)
Enables ISDN modulation. Not currently implemented.
V90(diModemV90Enable)
Enables or disables V90 modem modulation
K56flex(diModemK56Enable)
Enables or disables K56flex modem modulation
V34(diModemV34Enable)
Enables or disables V34 modem modulation
V32(diModemV32Enable)
Allows V.32 and V.32bix modulations up to 14.4 kbps. The following options are available:
• disable(0)—neither option is enabled
• enable(1)—support V.32 and V.32bis modulations.
V23(diModemV23Enable)
Enables or disables V23 modem modulation
V22 (doModemV22Enable)
Allow V.22 or Bell 212 modulations. The following options are available:
• disable(0)—Neither option is enabled
• enableV22(1)—V.22 modulation is enabled
• enableBell212(2)—Bell 212 modulation is enabled
V21 (doModemV21Enable)
Allow V.21 or Bell 103 modulations. The following options are available:
• disable(0)—Neither option is enabled
• enableV21(1)—V.21 modulation is enabled
• enableBell103(2)—Bell 103 modulation is enabled