SMC Networks SMC Tiger 10/100 SMC6128PL2 User Manual
Page 60
Configuring the Switch
3-8
3
Port Information
Displays port settings for a specified MST instance
Trunk Information
Displays trunk settings for a specified MST instance
Port Configuration
Configures port settings for a specified MST instance
Trunk Configuration
Configures trunk settings for a specified MST instance
VLAN
802.1Q VLAN
GVRP Status
Enables GVRP on the switch
802.1Q Tunnel
Configuration
Enables 802.1Q (QinQ) Tunneling
Basic Information
Displays information on the VLAN type supported by this switch
Current Table
Shows the current port members of each VLAN and whether or
not the port is tagged or untagged
Static List
Used to create or remove VLAN groups
Static Table
Modifies the settings for an existing VLAN
Static Membership by Port Configures membership type for interfaces, including tagged,
untagged or forbidden
Port Configuration
Specifies default PVID and VLAN attributes
Trunk Configuration
Specifies default trunk VID and VLAN attributes
Tunnel Port Configuration
Adds an interface to a QinQ Tunnel
Tunnel Trunk Configuration Adds an interface to a QinQ Tunnel
Private VLAN
Information
Displays Private VLAN feature information
Configuration
This page is used to create/remove primary or community
VLANs
Association
Each community VLAN must be associated with a primary VLAN
Port Information
Shows VLAN port type, and associated primary or secondary
VLANs
Port Configuration
Sets the private VLAN interface type, and associates the
interfaces with a private VLAN
Trunk Information
Shows VLAN port type, and associated primary or secondary
VLANs
Trunk Configuration
Sets the private VLAN interface type, and associates the
interfaces with a private VLAN
Protocol VLAN
Configuration
Configures protocol VLANs
System Configuration
Configures protocol VLAN system parameters
Table 3-2 Main Menu (Continued)
Menu
Description
Page