SMC Networks SMC Tiger 10/100 SMC6128PL2 - Manual (Page 339)

System Management Commands
4-31
4
banner configure department
This command allows the administrator to configure the department information
displayed in the banner. Use the no form to remove the department information from
the banner display.
Syntax
banner configure department dept-name
no banner configure company
dept-name - The name of the department.
(Maximum length: 32 characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
The user-entered data cannot contain spaces. The banner configure
department command interprets spaces as data input boundaries. The use of
underscores ( _ ) or other unobtrusive non-letter characters is suggested for
situations where whitespace is necessary for clarity.
Example
banner configure equipment-info
This command allows the administrator to configure the equipment information
displayed in the banner. Use the no form to remove the equipment information from
the banner display.
Syntax
banner configure equipment-info manufacturer-id mfr-id floor floor-id row
row-id rack rack-id shelf-rack sr-id manufacturer mfr-name
no banner configure equipment-info [floor | manufacturer |
manufacturer-id | rack | row | shelf-rack]
• mfr-id - The name of the device model number.
• floor-id - The floor number.
• row-id - The row number.
• rack-id - The rack number.
• sr-id - The shelf number in the rack.
• mfr-name - The name of the device manufacturer.
Maximum length of each parameter: 32 characters
Console(config)#banner configure department R&D
Console(config)#