SMC Networks SMC Tiger 10/100 SMC6128PL2 - Manual (Page 343)

System Management Commands
4-35
4
banner configure mux
This command allows the administrator to configure the mux information displayed
in the banner. Use the no form to remove the mux information from the banner
display.
Syntax
banner configure mux muxinfo
no banner configure mux
muxinfo - The circuit and PVC to which the switch is connected.
(Maximum length: 32 characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
The user-entered data cannot contain spaces. The banner configure mux
command interprets spaces as data input boundaries. The use of underscores
( _ ) or other unobtrusive non-letter characters is suggested for situations
where whitespace is necessary for clarity.
Example
banner configure note
This command allows the administrator to configure the note information displayed
in the banner. Use the no form to remove the note information from the banner
display.
Syntax
banner configure note note-info
no banner configure note
note-info - Miscellaneous information that does not fit the other banner
categories, or any other information of importance to users of the switch
CLI. (Maximum length: 150 characters)
Default Setting
None
Command Mode
Global Configuration
Console(config)#banner configure mux telco-8734212kx_PVC-1/23
Console(config)#