SMC Networks SMC Tiger 10/100 SMC6128PL2 - Manual (Page 412)

Command Line Interface
4-104
4
Default Setting
Accounting is not enabled
No servers are specified
Command Mode
Global Configuration
Command Usage
• This command runs accounting for Exec service requests for the local console
and Telnet connections.
• Note that the default and method-name fields are only used to describe the
accounting method(s) configured on the specified RADIUS or TACACS+
servers, and do not actually send any information to the servers about the
methods to use.
Example
aaa accounting commands
This command enables the accounting of Exec mode commands. Use the no form
to disable the accounting service.
Syntax
aaa accounting commands level {default | method-name} start-stop group
{tacacs+ |server-group}
no aaa accounting commands level {default | method-name}
• level - The privilege level for executing commands. (Range: 0-15)
• default - Specifies the default accounting method for service requests.
• method-name - Specifies an accounting method for service requests.
(Range: 1-255 characters)
• start-stop - Records accounting from starting point and stopping point.
• group - Specifies the server group to use.
- tacacs+ - Specifies all TACACS+ hosts configure with the tacacs-server
host command described on page 4-98.
- server-group - Specifies the name of a server group configured with the
aaa group server command described on 4-101. (Range: 1-255
characters)
Default Setting
Accounting is not enabled
No servers are specified
Command Mode
Global Configuration
Console(config)#aaa accounting exec default start-stop group tacacs+
Console(config)#