SMC Networks SMC Tiger 10/100 SMC6128PL2 - Manual (Page 443)

Authentication Commands
4-135
4
Command Mode
Global Configuration
Example
web-auth system-auth-control
This command globally enables web authentication for the switch. Use the no form
to restore the default.
Syntax
[no] web-auth system-auth-control
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
Both web-auth system-auth-control for the switch and web-auth for an
interface must be enabled for the web authentication feature to be active.
Example
web-auth
This command enables web authentication for an interface. Use the no form to
restore the default.
Syntax
[no] web-auth
Default Setting
Disabled
Command Mode
Interface Configuration
Command Usage
Both web-auth system-auth-control for the switch and web-auth for an
interface must be enabled for the web authentication feature to be active.
Example
Console(config)#web-auth session-timeout 1800
Console(config)#
Console(config)#web-auth system-auth-control
Console(config)#
Console(config-if)#web-auth
Console(config-if)#