SMC Networks SMC Tiger 10/100 SMC6128PL2 - Manual (Page 532)

Command Line Interface
4-224
4
Related Commands
garp timer (4-222)
Editing VLAN Groups
vlan database
This command enters VLAN database mode. All commands in this mode will take
effect immediately.
Default Setting
None
Command Mode
Global Configuration
Command Usage
• Use the VLAN database command mode to add, change, and delete VLANs.
After finishing configuration changes, you can display the VLAN settings by
entering the show vlan command.
• Use the interface vlan command mode to define the port membership mode
and add or remove ports from a VLAN. The results of these commands are
written to the running-configuration file, and you can display this file by
entering the show running-config command.
Example
Related Commands
show vlan (4-232)
Table 4-63 Editing VLAN Groups
Command Function Mode Page
vlan database Enters VLAN database mode to add, change, and delete
VLANs
GC 4-224
vlan Configures a VLAN, including VID, name and state VC 4-225
Console(config)#vlan database
Console(config-vlan)#