Switch power status, Figure 3-83, Displaying the global poe status – SMC Networks SMC Tiger 10/100 SMC6128PL2 User Manual
Page 188
Configuring the Switch
3-136
3
dropped to some low-priority ports and later the power demands on the switch fall
back within its budget, the dropped power is automatically restored.
Switch Power Status
Displays the Power over Ethernet parameters for the switch.
Command Attributes
• Maximum Available Power – The configured power budget for the switch.
• System Operation Status – The PoE power service provided to the switch ports.
• Mainpower Consumption – The amount of power being consumed by PoE
devices connected to the switch.
• Thermal Temperature
8
– The internal temperature of the switch.
• Software Version – The version of software running on the PoE controller
subsystem in the switch.
Web – Click PoE, Power Status.
Figure 3-83 Displaying the Global PoE Status
CLI – This example displays the current power status for the switch.
8. This parameter is not supported for the current hardware.
Console#show power mainpower
Unit 1 Mainpower Status
Maximum Available Power : 180 watts
System Operation Status : on
Mainpower Consumption : 0 watts
Software Version : Version 0x1B64, Build 0x07
Console#