SMC Networks SMC Tiger 10/100 SMC6128PL2 - Manual (Page 285)

Multicast Filtering
3-233
3
Web – Click IGMP Snooping, IGMP Filter/Throttling Port Configuration or IGMP
Filter/Throttling Trunk Configuration. Select a profile to assign to an interface, then
set the throttling number and action. Click Apply.
Figure 3-142 IGMP Filter and Throttling Port Configuration
CLI – This example assigns IGMP profile number 19 to port 1, and then sets the
throttling number and action. The current IGMP filtering and throttling settings for the
interface are then displayed.
Console(config)#interface ethernet 1/1 4-166
Console(config-if)#ip igmp filter 19 4-304
Console(config-if)#ip igmp max-groups 64 4-305
Console(config-if)#ip igmp max-groups action deny 4-305
Console(config-if)#end
Console#show ip igmp filter interface ethernet 1/1
4-306
Information of Eth 1/1
IGMP Profile 19
permit
range 239.1.2.3 239.1.2.3
range 239.2.3.1 239.2.3.200
Console#show ip igmp throttle interface ethernet 1/1
4-307
Information of Eth 1/1
status : TRUE
action : deny
max multicast groups : 64
current multicast groups: 0
Console#