SMC Networks SMC Tiger 10/100 SMC6128PL2 - Manual (Page 246)

Configuring the Switch
3-194
3
CLI – This example sets the interface to both transmit and receive LLDP messages,
enables SNMP trap messages, enables MED notification, and specifies the TLV,
MED-TLV, dot1-TLV and dot3-TLV parameters to advertise.
Displaying LLDP Local Device Information
Use the LLDP Local Device Information screen to display information about the
switch, such as its MAC address, chassis ID, management IP address, and port
information.
Web – Click LLDP, Local Information.
Figure 3-116 LLDP Local Device Information
Console(config)#interface ethernet 1/1 4-166
Console(config-if)#lldp admin-status tx-rx 4-252
Console(config-if)#lldp notification 4-252
Console(config-if)#lldp medNotification 4-253
Console(config-if)#lldp basic-tlv port-description 4-255
Console(config-if)#lldp basic-tlv system-description 4-256
Console(config-if)#lldp basic-tlv management-ip-address 4-254
Console(config-if)#lldp basic-tlv system-name 4-256
Console(config-if)#lldp basic-tlv system-capabilities 4-255
Console(config-if)#lldp medtlv extPoe 4-261
Console(config-if)#lldp medtlv inventory 4-261
Console(config-if)#lldp medtlv location 4-262
Console(config-if)#lldp medtlv med-cap 4-262
Console(config-if)#lldp medtlv network-policy 4-263
Console(config-if)#lldp dot1-tlv proto-ident 4-257
Console(config-if)#lldp dot1-tlv proto-vid 4-257
Console(config-if)#lldp dot1-tlv pvid 4-258
Console(config-if)#lldp dot1-tlv vlan-name 4-258
Console(config-if)#lldp dot3-tlv link-agg 4-259
Console(config-if)#lldp dot3-tlv mac-phy 4-259
Console(config-if)#lldp dot3-tlv max-frame 4-260
Console(config-if)#lldp dot3-tlv poe 4-260
Console(config-if)#