SMC Networks SMC Tiger 10/100 SMC6128PL2 - Manual (Page 125)

AAA Authorization and Accounting
3-73
3
When you have obtained these, place them on your TFTP server and transfer them
to the switch to replace the default (unrecognized) certificate with an authorized one.
Command Attributes
• TFTP Server IP Address – Specifies the IP address of the TFTP server which
contains the certificate file.
• Source Certificate File Name – Specifies the name of certificate file as stored on
the TFTP server.
• Source Private File Name – Specifies the name of the private key file as stored
on the TFTP server.
• Private Password – The password for the private key file.
Web – Click Security, HTTPS Settings. Fill in the TFTP server, certificate and private
file name details, then click Copy Certificate.
Figure 3-47 HTTPS Settings
CLI – This example copies the certificate file from the designated TFTP server.
Note: The switch must be reset for the new certificate to be activated. To reset the
switch, See “Resetting the System” on page 3-34 or type:
Console#reload
Console#copy tftp https-certificate 4-84
TFTP server ip address: <server ip-address>
Source certificate file name: <certificate file name>
Source private file name: <private key file name>
Private password: <password for private key>