SMC Networks SMC Tiger 10/100 SMC6128PL2 - Manual (Page 333)

System Management Commands
4-25
4
quit
This command exits the configuration program.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
The quit and exit commands can both exit the configuration program.
Example
This example shows how to quit a CLI session:
System Management Commands
These commands are used to control system logs, passwords, user names, browser
configuration options, and display or configure a variety of other system information.
Console#quit
Press ENTER to start session
User Access Verification
Username:
Table 4-7 System Management Commands
Command Group Function Page
Device Designation Configures information that uniquely identifies this switch 4-26
Banner Configures administrative contact and device indentification and location
information
4-27
User Access Configures the basic user names and passwords for management access 4-37
IP Filter Configures IP addresses that are allowed management access 4-39
Web Server Enables management access via a web browser 4-41
Telnet Server Enables management access via Telnet 4-44
Secure Shell Provides secure replacement for Telnet 4-45
Event Logging Controls logging of error messages 4-54
Time (System Clock) Sets the system clock automatically via NTP/SNTP server or manually 4-64
System Status Displays system configuration, active managers, and version information 4-77
Frame Size Enables support for jumbo frames 4-83