SMC Networks SMC Tiger 10/100 SMC6128PL2 - Manual (Page 502)

Command Line Interface
4-194
4
show power inline status
This command displays the current power status for all ports or for specific ports.
Syntax
show power inline status [interface]
interface
ethernet
• unit - Stack unit. (Range: 1-8)
• port - Port number. (Range: 1-26)
Command Mode
Privileged Exec
Example
Console#show power inline status
Interface Admin Oper Power(mWatt) Power(used) Priority
---------- ------- ---- ------------ ------------ --------
Eth 1/ 1 enable off 15400 0 low
Eth 1/ 2 enable off 15400 0 low
Eth 1/ 3 enable on 15400 7505 low
Eth 1/ 4 enable off 15400 0 low
Eth 1/ 5 enable off 15400 0 low
Eth 1/ 6 enable off 15400 0 low
Eth 1/ 7 enable on 15400 8597 low
.
.
.
Eth 1/23 enable off 15400 0 low
Eth 1/24 enable off 15400 0 low
Console#
Table 4-57 show power inline status parameters
Parameter Description
Admin The power mode set on the port (see power inline on page -192)
Oper The current operating power status (displays on or off)
Power (mWatt) The maximum power allocated to this port (see power inline maximum
allocation on page -192)
Power (used) The current power consumption on the port in milliwatts
Priority The port’s power priority setting (see power inline priority on page -193)