SMC Networks SMC Tiger 10/100 SMC6128PL2 - Manual (Page 238)

Configuring the Switch
3-186
3
designated promiscuous port in the isolated VLAN; it cannot communicate with
any other host ports.
- Promiscuous – A promiscuous port can communicate with all interfaces within
a private VLAN.
• Primary VLAN – Conveys traffic between promiscuous ports, and between
promiscuous ports and community ports within the associated secondary VLANs.
If PVLAN type is “Promiscuous,” then specify the associated primary VLAN.
• Community VLAN – A community VLAN conveys traffic between community
ports, and from community ports to their designated promiscuous ports. Set
PVLAN Port Type to “Host,” and then specify the associated Community VLAN.
• Trunk – The trunk identifier. (Port Information only)
Web – Click VLAN, Private VLAN, Port Configuration or Trunk Configuration. Set the
PVLAN Port Type for each port that will join a private VLAN. Assign promiscuous
ports to a primary VLAN. Assign host ports to a community VLAN. After all the ports
have been configured, click Apply.
Figure 3-111 Private VLAN Port Configuration