SMC Networks SMC Tiger 10/100 SMC6128PL2 - Manual (Page 413)

Authentication Commands
4-105
4
Command Usage
• The accounting of Exec mode commands is only supported by TACACS+
servers.
• Note that the default and method-name fields are only used to describe the
accounting method(s) configured on the specified TACACS+ server, and do
not actually send any information to the server about the methods to use.
Example
aaa accounting update
This command enables the sending of periodic updates to the accounting server.
Use the no form to disable accounting updates.
Syntax
aaa accounting update [periodic interval]
no aaa accounting update
interval - Sends an interim accounting record to the server at this interval.
(Range: 1-2147483647 minutes)
Default Setting
1 minute
Command Mode
Global Configuration
Command Usage
• When accounting updates are enabled, the switch issues periodic interim
accounting records for all users on the system.
• Using the command without specifying an interim interval enables updates,
but does not change the current interval setting.
Example
Console(config)#aaa accounting commands 15 default start-stop group
tacacs+
Console(config)#
Console(config)#aaa accounting update periodic 30
Console(config)#