SMC Networks SMC Tiger 10/100 SMC6128PL2 - Manual (Page 442)

Command Line Interface
4-134
4
Command Mode
Global Configuration
Command Usage
This command is not supported in the current release of the firmware.
Example
web-auth quiet-period
This command defines the amount of time a host must wait after exceeding the
failed login attempts limit, before it may attempt web authentication again. Use the
no form to restore the default.
Syntax
web-auth quiet-period time
no web-auth quiet period
time - The amount of time the host must wait before attempting
authentication again. (Range: 1-180 seconds)
Default Setting
60 seconds
Command Mode
Global Configuration
Example
web-auth session-timeout
This command defines the amount of time a web-authentication session remains
valid. When the session-timeout time has been reached, the host is logged off and
must re-authenticate itself the next time data transmission takes place. Use the no
form to restore the default.
Syntax
web-auth session-timeout timeout
no web-auth session timeout
timeout - The amount of time that an authenticated session remains valid.
(Range: 300-3600 seconds)
Default Setting
3600 seconds
Console(config)#web-auth login-success-page-url http://www.example.com/
success/
Console(config)#
Console(config)#web-auth quiet-period 120
Console(config)#