SMC Networks SMC Tiger 10/100 SMC6128PL2 - Manual (Page 435)

Authentication Commands
4-127
4
Example
network-access link-detection link-up
Use this command to configure the link detection feature to detect link up events.
When a link up event is detected, the feature can shut down the port, send an SNMP
trap, or both. Use the no form of this command to disable this feature.
Syntax
network-access link-detection link-up action [shutdown | trap |
trap-and-shutdown]
no network-access link-detection
Default Setting
Disabled
Command Mode
Interface Configuration
Example
network-access link-detection link-up-down
Use this command to configure the link detection feature to detect link-up and
link-down events. When either a link-up or link-down event is detected, the feature
can shut down the port, send an SNMP trap, or both. Use the no form of this
command to disable this feature.
Syntax
network-access link-detection link-up-down action [shutdown | trap |
trap-and-shutdown]
no network-access link-detection
Default Setting
Disabled
Command Mode
Interface Configuration
Console(config)#interface ethernet 1/1
Console(config-if)#network-access link-detection link-down action trap
Console(config-if)#
Console(config)#interface ethernet 1/1
Console(config-if)#network-access link-detection link-up action trap
Console(config-if)#